BIT3105P,Top sales BIT3105P,BIT3105P DATASHEET -ICSTOCK

Parameters	Condrtions	Min	Typ	Max	Units
Vd = lOV,ld = 1100 mA (Quiescent)
P-ldB		35.5	36.5		dBm
G.1 dB		11.0	12O		dB
3rd Order Products (1)		30	35		dBc
Efficiency	@ PldB		43		%
Vd= 8V,ld= 1300 mA (Quiescent)
P-ldB			35.5	dBm
G.l dB			10.0	dB

BIT3105P seller

NOTE: For further discussion of the PSPICE model, consult A New PSPICE Sub-Circuit for the Power MOSFET Featuring Globa
Temperature Options; written by William J. Hepp and C. Frank Wheatley.
BIT3105P datasheet

The CMY 210 is an all port single ended general purpose Up- and Down-Converter.
It combines small conversion losses and excellent intermodulation characteristics with a

low demand of LO- and DC-power.
The internal level controlled LO-Buffer enables a good performance over a wide LO level
range.
The internal mixers principle with one port RF and IF requires a frequency separation at
pin l and 6 respectively.
BIT3105P price

1111
-VCE = 10V - Ti = 25YC		I J
		J
		§

		f

	1
	1
	\|

BIT3105P pdf

Low Noise Amplifiers: The CX74036 contains two
independent LNAs for the cellular and PCS bands. The gain of
both LNAs can be switched off to a loss mode via one command

line interface. Only one LNA is powered at any given time.
Control is done by an external band-select control signal. The
input and output matches are external to the chip. The LNAs'
parameters, Noise Figure (NF), and gain are chosen to provide
an excellent balance between system sensitivity and IlP3
requirements to achieve maximum dynamic range. Both LNA
outputs are ported off-chip to allow for image filtering before
being fed to the RF mixer inputs.