Stock Map: 1   2   3   4   5   6   7   8   9   10   11   12   13   14   15  
1,M-P15G2 are hot selling, Following list are globle excellent suppliers of M-P15G2, If you want to purchase M-P15G2, you can contact the suppliers of M-P15G2 by email,telephone or leave a message for them.
2,Enter the right button for M-P15G2 DATASHEET Download of M-P15G2, free for datasheet of M-P15G2 

M-P15G2,Top sales M-P15G2,M-P15G2 DATASHEET

M-P15G2  Top sales 

5. Safety for operators and users
These LDs emit invisible laser radiation. It s classified into Class 4 according to the laser product standards of the IEC 60825-1 (Safety
of laser products Part l: Equipment classification, requirements and user s guide) and/or ANSI 2136.1 (American National Standard for
Safe Use of Lasers) etc. Direct or reflected laser beam from these LDs may damage eyes or skin by being absorbed by cells. In the
worst case, it leads to burn or loss of eyesight. The operator must not stare the emitting area of LDs, must avoid direct exposure to the
laser beam. Wear eye-protectors (glasses or goggles) against laser radiation while operating a device. Please provide adequate
information to the end-user of its classification, performances and warnings of the products using these LDs, defying the regulations of
IEC 60825-1 and/orANSI 2136.1 etc.
M-P15G2   seller 

Applications
. Audio & Video Applications (TV, VTR, Audio, DVDP, CDP)
. Home Appliances (Air conditioner, Computer, Camcoder)
. Wireless Toys
. Remote Control Equipment
M-P15G2   datasheet 



Parameter


Conditions


Symbol


Min


Typ


Max


Unit


Repetitive peak reversevoltage


VRRM


40


v


Reverse voltage


VR


40


v


Average forward rectified current

10


500


mA


Forward current ,surge peak

8.3 ms single half sine-wave superim posed
on rateload( JEDEC method)


IFSM


5 5


A


Storage temperature


TSTG


-40


+125


oc


Junction temperature


Tj

-40

+125

oc


M-P15G2   price 

* Selector chart of technccal data see page 48
~ Case colour black
, Combination terminals for solder or PCB mounting
* Accessories for lamp holders have to be ordered
separately, see page 40-42 (EMF)
* Approvals.
M-P15G2   pdf 

The 100BASE-TX MLT3 code contains significant low frequency components which are not passed through the
isolation transformers and cannot be restored by an adaptive equalizer. This leads to a phenomenon known as
base-line wander which will cause an unacceptable increase in error rate, if not corrected. The LAN83C180 employs
a quantized feedback technique to restore the low frequency components and thus maintain a very low error rate
even when receiving signals such as the "killer packet" described in the TP_PMD spec.
©© Copyright:-www.13ic.Com 2000-2010 Message at MSN:search_01@live.com
Service hot :(86)-0755-86525401 Fax:86-755-84521245