MC34063AP1G,Top sales MC34063AP1G,MC34063AP1G DATASHEET -ICSTOCK

WJ eojTjjTji;jniCa2iOnS, lrne o Phone l-800-WJl-44 01 0 FAX: 408-577~21 u o:maiil: Sales@wj.com o VVeb site: www.wj com
MC34063AP1G seller

The two outputs of the PV11050N may be applied separately with a maximum 1200VDC between the outputs
Input-to-output isolation to either output is 2500V (RMS).
MC34063AP1G datasheet

When the word count of channel l decrements to FFFFH, a
TC is generated causing an EOP output, terminating the
service, and setting the channel l TC bit in the Status
register. The channel l mask bit will also be set, unless the
channel l mode register is programmed for autoinitialization.
Channel o word count decrementing to FFFFH will not set
the channel o TC bit in the status register nor generate an
EOP, nor set the channel o mask bit in this mode. It will
cause an autoinitialization of channel 0, if that option has
been selected.
MC34063AP1G price

IFEATURES

High optical power & high radiant flux

density(CW)
L8933 series : 0.5 W / 50m

L8446 series : 1 W/100m

L8763 series : 1 W/ 50 ym
L8828 series : 2 W/100m

* High stability

Long life
,Compact
MC34063AP1G pdf

			Limits
S\imbO	Parameter		Min	TVp	Max	Unit
ICEX	Collector cutoff current	VCE=600V, VEB=2V			1 0	rnA
ICBO	Collector cutoff current	VCB=600V, Ernitter open			1 0	rnA
IEB	Emitter cutoff current	VEB=7V			80	mA
VCE (satl	Collector-emitter saturation voltage				2 0	V
VBE (satl	Base-emitter saturation voltage	lc=15A, IB=0.3A			2 5	V
-VCE	Collector-emitter reverse voltage	-lc=15A 1diode forward voltage}			1 5	V
hFE	DC current gain	lc=15A, VCE=2V/5V	50/100
ton					1 5
ts	Switching time	Vcc=300V, lc=15A, IBn =-IB2=0 3A			8 0
tf	Switching time	Vcc=300V, lc=15A, IBn =-IB2=0 3A			2 0
Rth lj-cl0	Thermal resistance	Transistor part			1 2	YC/W
Rth lj-c)R	(junction to case)	Diode part			2 5	YC/W
Rth lc-f)	Contact thermal resistance (case to fin)	Conductive grease applied			0 4	YC/W