Stock Map: 1   2   3   4   5   6   7   8   9   10   11   12   13   14   15  
1,ML6692CQ are hot selling, Following list are globle excellent suppliers of ML6692CQ, If you want to purchase ML6692CQ, you can contact the suppliers of ML6692CQ by email,telephone or leave a message for them.
2,Enter the right button for ML6692CQ DATASHEET Download of ML6692CQ, free for datasheet of ML6692CQ 

ML6692CQ,Top sales ML6692CQ,ML6692CQ DATASHEET

ML6692CQ  Top sales 

64K x 16 Bit High-Speed CMOS Static RAM(3.3V Operating)

FEATURES GENERAL DESCRIPTION

. Fast Access Time 10,12,15,20ns(Max.) The K6R1016VIC is a l,048,576-bit high-speed Static Random
. Low Power Dissipation Access Memory organized as 65,536 words by 16 bits. The
Standby (TTL) : 30mA(Max.) K6R1016VIC uses 16 common input and output lines and has
(CMOS) : 5mA(Max.) at output enable pin which operates faster than address access
0.5mA(Max.) L-ver. only time at read cycle. Also it allows that lower and upper byte
Operating * K6R1016VIC-10: 105mA(Max.) access by data byte control (UB, LB). The device is fabricated
K6R1016VIC-12: 95mA(Max.) using SAMSUNG's advanced CMOS process and designed for
K6R1016VIC-15: 93mA(Max.) high-speed circuit technology. It is particularly well suited for
K6R1016VIC-20: 90mA(Max.) use in high-density high-speed system applications. The
. Single 3.3V Power Supply K6R1016VIC is packaged in a 400mil 44-pin plastic SOJ or
. TTL Compatible Inputs and Outputs TSOP2 forward or 48-Fine pitch BGA.
. Fully Static Operation
- No Clock or Refresh required
. Three State Outputs
. 2V Minimum Data Retention: L-ver. only
. Center Power/Ground Pin Configuration
. Data Byte Control: LB: l/01~ l/08, UB: l/09~ l/016
. Standard Pin Configuration:
K6R1016VIC-J: 44-SOJ-400
K6R1016VIC-T: 44-TSOP2-400BF
K6R1016VIC-F: 48-Fine pitch BGA with 0.75 Ball pitch
ML6692CQ   seller 


Non rep~titk



] 8.3 ms I
] 16.dw





-- -









--

jj


Junt



'nt.r



Tp.r



-Iu1







--







l


prior

3W

ee-


112!



-N.


ML6692CQ   datasheet 

Notice 3. The operation life should be endured 5,000 shots under the charge current
(lxe " 150A : full luminescence condition) of main condenser (CM=400ccF).
Repetition period under full luminescence condition is over 3 seconds.
ML6692CQ   price 

To turn the power module on and off, the user must
supply a switch to control the voltage between the
on/off terminal and the Vi(-) terminal (Vonroff). The
switch can be an open collector or equivalent (see
Figure 14). A logic low is Vonioff = 0 V t0 1.2V. The max-
imum lonioff during a logic low is l mA. The switch
should maintain a logic-low voltage while sinking l mA.
ML6692CQ   pdf 

8) Add /ST, if /ST > 0, add /IN, if VIN>5.5 V
9) Short circuit current limit for max. duration of td(SC) max=450 ccs, prior to shutdown
io) Requires iso I resistor in GND connection. The reverse load current through the intrinsic drain-source
diode has to be limited by the connected load. Note that the power dissipation is higher compared to norma
©© Copyright:-www.13ic.Com 2000-2010 Message at MSN:search_01@live.com
Service hot :(86)-0755-86525401 Fax:86-755-84521245