MNR34J5AJ101,Top sales MNR34J5AJ101,MNR34J5AJ101 DATASHEET -ICSTOCK

loaded into the device. After the last bit of the opcode is shifted in, the eight bits of the
status register, starting with the MSB (bit 7), will be shifted out on the SO pin during the
next eight clock cycles. The five most significant bits of the status register will contain
device information, while the remaining three least-significant bits are reserved for future
use and will have undefined values. After bit o of the status register has been shifted
out, the sequence will repeat itself (as long as CS remains low and SCK is being tog-
gled) starting again with bit 7. The data in the status register is constantly updated, so
each repeating sequence will output new data.
MNR34J5AJ101 seller

75'C -	¨ll\| \|\|	25JC - o: -25 C
	\|\|f
JfJ	'f

MNR34J5AJ101 datasheet

Symbolter Rating Unit
1 0PR	-25 to +80	aC	Operating Temperature
TSTG	-30 to +100	aC	Storage Temperature
TSOL	260 for 5 sec	aC	Lead Soldering Time
IF	20	mA	Continuous Forward Current
IF	100	mA	Peak Forward Current (f = 100 Hz, Duty Factor = 1/10)
VR	5	V	Reverse Voltage
PD	120	mW	Power Dissipation
			1 0f 3

MNR34J5AJ101 price

Dimensions	Inches	Mimeters
A	4 33	110 0
B	3 15	80 0
c	3.66+0.008	93.0+0.25
D	2.44+0.008	62.0+0.25
E	1 57	40 0
F	1.42 Max	36.0 Max.
G	1 14	29 0
H	1.00 Max	25.5 Max.
J	0 96	25 0
K	0 94	24 5
L	0 83	21 0
M	0 71	18 0

MNR34J5AJ101 pdf

For other output voltages the value of the required resistor
can either be calculated using the following formula, or
simply selected from the range of values given in Table 2-2
Figure 2-1 shows the placement of the required resistor.