MR27V1602E-30MAZ060,Top sales MR27V1602E-30MAZ060,MR27V1602E-30MAZ060 DATASHEET -ICSTOCK

COMMON EMITTER
VGE =15V					20 -__
	__	-_	_______	__	15
					10

					= 2l-

MR27V1602E-30MAZ060 seller

Emitter-Collector Voltage" VEC	IE = 300A, VGE = OV			2.6	Volts
Emitter-Collector Voltage VFM	IF = 300A, Clamp Diode Part			2.6	Volts
* Pulse width and repetition rate should be such that the device j	junction temperature (Tj) does not exceed Tj(max)	rating
Dynamic Electrical Characteristics, Tj = 25	IC unless otherwise specified	rating
Characteristics Symbol	Test Conditions	Min	Typ	Max	Units
Input Capacitance Cies				26.4	nf
Output Capacitance Coes	VCE = 10V VGE = OV			14.4	nf
Reverse Transfer Capacitance Cres	VCE = 10V VGE = OV			4	nf
Resistive Turn-on Delay Time td(on)	Vcc = 300V, lc = 300A,			250	ns
Load Rise Time tr	VGEl = VGE2 = 15V,			600	ns
Switch Turn-off Delay Time td(off)	RG = 2.1fl,, Resistive			350	ns
Times FaIITime tf	Load Switching Operation			300	ns
Diode Reverse Recovery Time" trr	IE = 300A, diE/dt = -600A/as			160	ns
Diode Reverse Recovery Charge" Qrr	IE = 300A, diE/dt = -600A/as		0.72		o:c
Diode Reverse Recovery Time trr	IF = 300A, Clamp Diode Part			160	ns
Diode Reverse Recovery Charge Qrr	diF/dt = -600N~s		0.72		o:c

MR27V1602E-30MAZ060 datasheet

TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general
can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the
buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and
to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or
damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the
most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling
Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc..
The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal
equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are
neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or
failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy
control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control
instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document
shall be made at the customer's own risk.
MR27V1602E-30MAZ060 price

FAMILY DESCRIPTION
The Philips Semiconductors XA (eXtended Architecture) family of
16-bit single-chip microcontrollers is powerful enough to easily
handle the requirements of high performance embedded
applications, yet inexpensive enough to compete in the market for
high-volume, low-cost applications.
MR27V1602E-30MAZ060 pdf

Quality:
Mitsubishi Electric is not liable for failures resulting from base station operation time or operating conditions
exceeding those of mobile radios.
This module technology results from more than 20 years of experience, field proven in tens of millions of mobile
radios. Currently, most returned modules show failures such as ESD, substrate crack, and transistor burnout, which
are caused by improper handling or exceeding recommended operating conditions. Few degradation failures are
found.