PJ2915CD,Top sales PJ2915CD,PJ2915CD DATASHEET -ICSTOCK

- IF =10 mA - vcc=lov TA -2 1 jC
	Toff		j
	Ton	Tf
---t
-

PJ2915CD seller

Limiting values definition - Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 1 34). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or
at any other conditions above those given in the Characteristics sections ofthe specification is not implied. Exposu re to limiting values for extended
periods may affect device reliability.
PJ2915CD datasheet

Symbol	Parameter	Conditions	Ratings	Unit
VCES	Collector-emitter voltage	VGE= OV	600	v
VGES	Gate-emitter voltage	VCE= OV	+20	V
VGEM	Peak gate-emitter voltage	VCE= OV	+30	V
lc	Collector current		75	A
ICM	Collector current (Pulsed)		150	A
Pc	Maximum power dissipation		300	W
Tj	Junction temperature		-40+150	YC
Tstg	Storage temperature		-40+150	YC
	Weight	Typical value	9 8	g

PJ2915CD price

The output type of each bit (pin) in ports PO, Pl, P2, P3 (except for the P33/HOLD pin), P4, P5, P6, P7, P9, PA,
PB, and PC can be selected individually from the following two options. (inl-bit units)
PJ2915CD pdf

Symbol	Description	Conditions	Min	Typ	Max	Units
VOUT	Output Voltage		-1.5		1.5	%
IOUT	Output Current	VOUT> 1.2V	300			mA
lsc	Short Circuit Current	VOUT< 0.4V			300	mA
IQ	Ground Current	VIN = 5V, no load		30	50
ISD	Shutdown Current	VIN = 5V, EN = low			1	c<A
CVOUT/ VOUT	Line Regulation	IOUT = 5ffiA, VIN = VOUT + 1 toVour+2		0.02	0.1	%
CVOUT/ VOUT	Load Regulation	IOUT = 1mA t0 300mA		0.2	1	%
VDO	Dropout Voltagei	IOUT= 300mA		200	300	mV
VENL	Enable Threshold Low		0.5			V
VENH	Enable Threshold High				VIN-0.5	V
PSRR	Power Supply Rejection Ratio	1 kHz		55		dB
TSD	Over Temp Shutdown Threshold			150		][C
THYS	Over Temp Shutdown Hysteresis			30		][C
eN	Output Noise			20		ccVRMS
TC	Ouput Voltage Temp. Coeff.			40		ppmnC