SA9.0A/CA,Top sales SA9.0A/CA,SA9.0A/CA DATASHEET -ICSTOCK

-i -	·}
i	1 r

1 ++ H T1 T]n
	T T Tl=r 11

SA9.0A/CA seller

Figure 5 shows an example of a circuit that can be
used to interface the PECL outputs of the 1340 receiver
with a device which requires true, negative voltage ECL
inputs. The 100314 is an ECL line receiver and is
shown here only as an example to demonstrate this
coupling procedure. The DATA lines are terminated in a
so I equivalent impedance but are ac-coupled to the
100314. The capacitive coupling isolates and permits
level shifting of the positiveDATA outputs of the
receiver to the proper negative level required by the
inputs of the 100314. The VBB output of the 100314
provides the reference voltage required to center the
voltage swing of theDATA signals around the input
switching threshold of the 100314. The Thevenin
equivalent of the 166 I and 250 I resistor pair is
ioo I , which, in parallel with the 100 I resistor con-
nected to VBB, results in a 50 I equivalent impedance
for the load on each of the data lines. Alternatively, if
there is no VBB reference available, a second pair of
166 I /250 I resistor networks could be used on the
data lines on the 100314 side of the coupling capacitor
SA9.0A/CA datasheet

					Version
Parameter	Symbol	Test Condition			-75	·1H		·1L	Unit	Note
Operating Current (One Bank Active)	lcci	Burst length = 1 tRC > tRc(rTiin) lo = 0 mA			50	50		45	mA	1
Precharge Standby Current	Icc2P	CKE iViL(max), tcc = 10ns			O5				mA
in power-down mode	lcc2PS	CKE & CLKiViL(max), tcc =			0.5
Precharge Standby Current	Icc2N	CKE > VIH(min), CS > VIH(Friin), tcc = 10ns Input signals are changed one time during 20ns			10				mA
in non power-down mode	lcc2NS	CKE > VIH(min), CLK iVIL(max), tcc =.. Input signals are stable			7
Active Standby Current	ICC3P	CKE iViL(max), tcc = 10ns			5				mA
in power-down mode	ICC3PS	CKE & CLKiViL(max), tcc =			5
Active Standby Current	ICC3N	CKE > VIH(min), CS > VIH(rTiin), tcc = 10ns Input signals are changed one time during 20ns			20				mA
in non power-down mode (One Bank Active)	ICC3NS	CKE > VIH(min), CLKiViL(max), tcc =.. Input signals are stable			20				mA
Operating Current (Burst Mode)	lcc4	lo = 0 mA Page burst 4Banks Activated tCCD = 2CLKs			80	65		65	mA	1
Refresh Current	lcc5	tRC > tRc(rTiin)			115	110		100	mA	2
			·E/C		500				uA	4
			·N/L		300					5
				Internal TCSR	Max 40		Max 85/70		oc	3
Self Refresh Current	lcc6	CKE 10.2V		Full Array	185		300
			·G/F	1/2 0f Full Array	160		240		uA	6
				1/4 0f Full Array	145		220

SA9.0A/CA price

HAMAMATSU PHOTONICS K.K., Electron Tube Center
314-5, Shimokanzo, Toyooka-village, lwata-gun, Shizuoka-ken, 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205
U S.A.: Hamamatsu Corporation: 360 Foothill Road, P O Box 6910, Bridgewater N.J 08807-0910,
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658
France: Hamamatsu Photonics France S A R.L.: 8, Rue du Saule Trapu, Pare du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10
United Kingdo: Hamamatsu Photonics UK Limited: Lough Point, 2 Gladbeck Way, Windmill Hill, Enfield, Middlesex EN2 7JA, United Kingdom, Telephone: 44(20)8-367-3560, Fax: 44(20)8-367-6384
North Europe: Hamamatsu Photonics Norden AB: Smidesvagen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01
italy: Hamamatsu Photonics ltalia: S R.L : Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741
SA9.0A/CA pdf





- - - .lout=-lmA - - - - - - lout=-30mA :out=-50mA /:i/ , . I I